Konica Minolta bizhub C451 - Manual (Page 57)

Transmission 2
C451 2-14
4
Load the original on the
original glass, and touch
buttons in order of [Scan
Settings], [Separate
Scan], [OK] and then
press [Start] key.
5
Load the original sequentially on the original glass and press [Start]
key.
– This operation is repeated until all the original to be sent is scanned.
– If [Change Setting] is touched, 1-Sided/2-Sided setting and Frame
Erase setting, etc. can be changed.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
The transmission be-
gins.