Konica Minolta bizhub C451 - Manual (Page 62)

Transmission 2
C451 2-19
2.5 Specifying the scan conditions
If [Scan Settings] is touched, [Original Type], [Simplex/Duplex], [Resolution],
[File Type], [Density] are displayed and transmission conditions as per the
original to be sent can be specified.
!
Detail
When sending a color transmission, set “Destination Machine Type” to
“Color”. For details on the “Color” setting, refer to “Specifying by direct
input” on page 2-28 and “Registering IP Addresses in Address Book” on
page 8-7.
Specifying Scan Settings
1
Touch [Scan Settings] of the Fax/Scan screen.
2
Select the function to be specified.
2
Note
Transmission condition cannot be specified for each page.