Konica Minolta bizhub C451 User Manual
Page 160
Useful transmission functions
6
C451
6-19
For North America models (Inch)
For setting the Fold erase values in North American models (Inch)
with fraction display, touch [
], change the numerator and de-
nominator and then touch [-], [+].
For setting the Center Erase values in the numeric display in North
American models (Inch), press keypad or [-] and [+]. “Input Error” is
displayed when a numerical value outside the range is input. When
“Input Error” is displayed or when there is any mistake while enter-
ing the deletion width, press [C] (clear) key and enter the value
again.
For details on switching between decimal and fraction values, refer
to “User’s Guide [Copy Operations]”.
–
For details on [Frame Erase], refer to “Sending the fax after erasing
shadows (Frame Erase)” on page 6-12.
6
Touch [OK].
Returns to Book Scan screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen
9
Set other functions if required.
–
For details on Scan Settings, refer to “Specifying the scan condi-
tions” on page 2-19 or “Scan Settings” on page 6-2.
–
For details on Original Settings, refer to “Original Settings” on
page 6-4.
–
For details on communication settings, refer to “Communication
Settings” on page 6-5.