Rx doc. settings, Forwording dest, Password – Konica Minolta bizhub C200 User Manual
Page 147: Rx doc. settings -13 forwording dest -13, P. 9-13, Ssword
C200
9-13
Administrator Management settings
9
2
Note
Any password can be specified. If no password is specified, continue with the next parameter.
RX Doc. Settings
Specify how documents are managed after [Yes] is touched.
-
Print: Select this setting to immediately print the document once it is received.
-
Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
-
Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
-
Memory RX: Select this setting to save the received document in a Network user box without being
printed.
2
Note
Print documents saved in user boxes from the Doc. tab of the Job List. For details, refer to
display and operations" on page 2-5
Forwording Dest.
Specify a destination when "RX Doc. Settings" is set to "Forward" or "Print & Forward".
-
To select a new destination, touch [Next Dest.], and then select the destination.
-
To delete a registered destination, select it, and then touch [Delete].
9.5.5
Document Management - RX Document - G3-1/G3-2 (G3)
Specify how documents received at the G3-1 and G3-2 ports are managed.
Password
Register the password necessary for retrieving documents. For confirmation, type in the password again.
2
Note
Any password can be specified. If no password is specified, continue with the next parameter.