Konica Minolta bizhub C200 - Manual (Page 74)

C200 4-32
Transmitting data 4
4.5.10 Fax - Password TX (G3)
This function sends a transmission with a password applied. If the recipient’s fax machine is set for closed
network receptions, the sender’s fax machine must transmit with the same password as the closed network
reception password.
- This function can be used only if the recipient’s machine is compatible with closed network (password)
receptions.
!
Detail
In order to specify the "Password TX" function, the password must first be specified in Administrator
mode. For details, refer to
"Fax Settings - Password Communication (G3)" on page 9-18 .
This function does not appear if the optional fax kit has not been installed.
4.5.11 Fax - Remote Copy (G3)
Use this function to send two or more copies of the same original to the recipient. The number of copies
printed by the recipient can be specified in advance.
Use the keypad to type in the number of copies, and then touch [OK].
- The number of copies can be set to any number between 2 and 99.
- This function cannot be used if the recipient’s fax machine does not allow remote copying because of
the F-code.
!
Detail
With software switch settings, the number of remote copies can be limited. For details, refer to the
User’s Guide [Network Administrator].
This function does not appear if the optional fax kit has not been installed.