Konica Minolta bizhub C200 - Manual (Page 90)

C200 5-9
Receiving data (G3/IP/I-FAX) 5
5.5.2 Printing reduced to fit the paper
The paper sizes that can be received are A5 w, B5 v, B5 w, A4 v, A4 w, B4 w and A3 w.
If paper the same size as the received document is not loaded, either paper of one size larger is selected or
the document is automatically reduced. For example, if A4-size paper is loaded and a B4-size document is
received, the document is reduced to A4 size and printed.
If a document with the A4, B5 w or A5 w size is received, the document can be automatically rotated 90
degrees and printed, regardless of the difference in orientation of the document and paper (rotation printing).
In addition, with software switch settings, the machine can be set whether or not to use rotation printing to
crisscross sort when remote copies are received.
As a factory default, the received document is not printed on paper in the bypass tray. To print on paper
loaded in the bypass tray, specify the necessary software switch settings. For details, refer to the User’s
Guide [Network Administrator]
!
Detail
With software switch settings, settings for the following can be changed. For details, refer to the User’s
Guide [Network Administrator].
Selecting paper when printing received documents
Specifying settings for fax reception functions
Selecting the paper cassette when faxes are received
5.5.3 Receiving long documents
If a long document (as compared to standard-size documents (A4 or B4)) is received, it is reduced and printed
as described below. In this case, the most suitable zoom ratio is automatically selected so that the document
fits within the paper.
If the document does not fit within the paper, even after being reduced to 65%, the document is divided and
printed on two sheets of paper. In this case, a joining line is printed on both sheets. (If larger paper is loaded,
the document is printed on the larger paper without being divided.)
!
Detail
To change the reduction limit or to cancel reduction, change the software switch settings. For details,
refer to the User’s Guide [Network Administrator].
A
A