Konica Minolta bizhub C200 - Manual (Page 63)

C200 4-21
Transmitting data 4
!
Detail
Relay stations must be registered in advance. For details, refer to the User’s Guide [Network
Administrator].
If settings have been specified for "SMTP Authentication User Name" and "SMTP Authentication
Password" on the relay station, the SMTP authentication user name and SMTP authentication
password must be specified on the machine sending the fax when the relay station is registered. For
details, refer to the User’s Guide [Network Administrator].
For details on specifying the relay station given priority, refer to "Default Settings - Fax/Scan - IP
Relay Dest. Selection" on page 8-7 .
4.3.10 Dial - E-Mail
From the control panel, type in the e-mail address.
- Domain: If frequently entered domain names have been registered, the e-mail address can easily be
entered.
- Add: Touch this button to specify an additional destination.
2
Note
If the optional fax kit has not been installed, [Address] appears instead of [Dial].
4.3.11 On-Hook (G3)
This machine can be used to send a fax manually. Position the original, and then specify the settings, for
example, for the image quality, if necessary. Touch [On-Hook] to take the machine off the hook, and then
specify the destination.
2
Note
This function does not appear if the optional fax kit has not been installed.