Konica Minolta bizhub C200 - Manual (Page 71)

C200 4-29
Transmitting data 4
4.5.2 Set 1 - TX Report (G3/IP/I-FAX/E-Mail/FTP/SMB/Relay)
Specify the timing for printing the transmission results report.
2
Reminder
For details on the settings for printing the result report, refer to "Report Settings" on page 9-24 .
4.5.3 Set 1 - 2in1 (G3/IP/I-FAX/Relay/E-Mail/FTP/SMB)
Select whether or not a two-page original is scanned and sent as a one-page original.
- Load the original into the ADF. Do not place the original on the original glass.
- Only A5/B5/A4-size originals are compatible with this function.
- The "2-Sided TX", "Rotation TX" and "Quick Scan TX" functions, the "No Reduction" setting in addition
to "On-Hook" cannot also be specified.
4.5.4 Set 1 - 2-Sided TX (G3/IP/I-FAX/Relay/E-Mail/FTP/SMB)
Select whether or not a double-sided original is scanned and sent as a double-sided original. Also, select the
binding position of the loaded original.
- Load the original into the ADF with the front side face up. Do not place the original on the original glass.
- The "2-Sided TX", "Stamp" and "Quick Scan TX" functions in addition to "On-Hook" cannot also be
specified.
Setting Description
Default The settings previously specified in Administrator mode are displayed.
ON Select this setting to print the result report, regardless of the transmission result.
If TX Fails Select this setting to print the result report only if a fax could not be sent.
OFF Select this setting to not print the result report, regardless of the transmission result.