Konica Minolta bizhub C200 - Manual (Page 76)

C200 4-34
Transmitting data 4
4.5.15 URL Notification (FTP/SMB)
With FTP or SMB file transmissions, an e-mail message can be sent to notify the recipient that the job is
completed. Specify the e-mail address where this notification message is to be sent.
From the e-mail addresses registered as one-touch destinations, select the notification address. Before
specifying a setting for URL notification, register the e-mail address to receive the notification as a one-touch
destination.
!
Detail
The destinations that can be specified for URL notification are those for FTP or SMB file transmissions.
This feature does not function during e-mail transmissions, Internet faxing, IP address faxing, G3 faxing
and IP relay transmissions, even if a setting has been specified.
4.5.16 Application - Bulletin Setting (G3)
Documents can be registered on a bulletin board to be sent when the instructed by the recipient.
!
Detail
In order to register a document on a bulletin board, the bulletin board must be set up in advance. For
details on registering a bulletin board, refer to
"Bulletin (G3)" on page 6-5 .
This parameter does not appear if the optional fax kit has not been installed.
Registering a document on a bulletin board
Select the bulletin board where the document is to be registered, and then specify settings, for example, for
the resolution and density.
- The "Quick Scan TX", "Quick Memory TX", "Polling TX", "Timer TX", "Password TX" and "F-Code TX"
functions cannot also be specified.
Bulletin Setting - Quality
For the setting procedure, refer to "Quality (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page 4-23 .
Bulletin Setting - Density
For the setting procedure, refer to "Density (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page 4-24 .
Bulletin Setting - Reduction/Area
For the setting procedure, refer to "Reduction/Area (G3)" on page 4-25 .