When specifying with one-touch dial buttons, When directly typed in, 19 application - polling rx (g3) – Konica Minolta bizhub C200 User Manual
Page 79: Application - polling rx (g3) -37, P. 4-37
C200
4-37
Transmitting data
4
When specifying with one-touch dial buttons
When specifying the sender with one-touch dial buttons, the F-code must be registered in advance. Specify
the time that the fax is to be received, and then press the [Start] key.
When directly typed in
Specify settings for the following, and then press the [Start] key.
-
Fax number
-
F-Code (SEP)
-
F-Code P/W (SID/PWD) (if required)
-
Reception time
4.5.19
Application - Polling RX (G3)
A document loaded in the sender’s machine or the document reserved for polling transmission can be sent
with a command from the recipient. This is convenient when the recipient is to incur the cost of the call.
2
Note
This function does not appear if the optional fax kit has not been installed.
1
Select the method for specifying the sender, and then specify the sender.