Konica Minolta bizhub C200 - Manual (Page 158)

C200 9-24
Administrator Management settings 9
9.9 Report Settings
9.9.1 TX Report (G3/IP/I-FAX/Relay/E-mail/FTP/SMB)
The printing conditions for the results report can be specified. These settings can be changed during
transmission. (Default: "If TX Fails" for "Single Dest"; "If TX Fails" for "Broadcasting")
Select how the result report is printed according to the number of recipients.
ON: Select this setting to print the result report with each transmission.
If TX Fails: Select this setting to automatically print the result report only if the fax could not be sent.
OFF: Select this setting to not print the result report.
9.9.2 Activity Report (G3/IP/I-FAX/Relay/E-mail/FTP/SMB)
Select whether or not to automatically output the activity report with every 50 transmissions. (Default: ON)