Konica Minolta bizhub C200 - Manual (Page 166)

C200 10-8
Fax/Scan function troubleshooting 10
10.4.6 IP relay transmission
10.4.7 Internet fax Full mode communication
Error code Cause Action
E4FFFE A specific length of time has passed without
confirmation of whether or not the relay station
has sent the fax. (The result notification could
not be received from the IP relay station within
a specific length of time.) Check if the receiver could receive the fax.
E53XXX Since the recipient specified for gateway trans-
mission is incorrect, transmission is not possi-
ble. Check with the sender.
E65XXX An attempt was made to send data that cannot
be sent with a gateway transmission. An at-
tempt was made to send a fax with a file attach-
ment in a format other than TIFF-F or with text
where one line exceeds 1000 characters. Check with the sender.
E7XXXX SMTP authentication failed. Check the IP relay settings.
EBXXXX Data sent with a gateway transmission cannot
be received. Check that communication with the mail server
is possible, that the network settings are cor-
rect, and that the domain name is correct.
FFF003 Wait status on the result notification for the IP
relay Wait until transmission from the IP relay station
is finished.
Error code Cause Action
E4FFFC A specific length of time has passed without
confirmation of whether or not the recipient's
machine received the fax. (The MDN response
could not be received within a specific length of
time.) Check if the receiver could receive the fax.
E4FFFD The number of results that can be managed has
been exceeded. Check if the receiver could receive the fax.
E4FFFF A notification was given of an abnormality in the
MDN/DSN response. Send the document again.
FFF001 The recipient's machine correctly received the
fax. (The MDN response was received.) Not required