Konica Minolta bizhub C200 - Manual (Page 150)

C200 9-16
Administrator Management settings 9
RX Doc. Settings
Specify how documents are managed.
- Print: Select this setting to immediately print the document once it is received.
- Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
- Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
- Memory RX: Select this setting to save the received document in the created user box without being
printed.
2
Note
Print documents saved in user boxes from the Doc. tab of the Job List. For details, refer to "Job List
display and operations" on page 2-5 .
Forwarding Dest.
Specify a destination when "RX Doc. Settings" is set to "Forward" or "Print & Forward".
- To select a new destination, touch [Next Dest.], and then select the destination.
- To delete a registered destination, select it, and then touch [Delete].
Remote Input Check
If F-codes are used, select whether remote input checking is enabled or disabled.