Konica Minolta bizhub C200 - Manual (Page 163)

C200 10-5
Fax/Scan function troubleshooting 10
10.3 Displaying an error message
When any trouble occurs, this machine displays an error screen with one of error messages shown in the
following table. Refer to the following table for corrective action.
If the action also fails to enable successful communication, contact your service representative.
10.3.1 G3 Fax
Error message Action
The original size cannot be detect-
ed. The original size could not be detected. Select the original size.
Cannot be set with XXXX. Settings or functions that cannot be specified at the same time have been
specified. Select only one of the settings or functions.
The job has been deleted due to in-
sufficient memory. The memory if full. If documents stored in the memory are waiting to be print-
ed, print them.
Malfunction detected. Inform the
service representative of the error
code. Some malfunction occurred in the machine. Inform your service representative
of the code displayed in the screen.