Konica Minolta bizhub C200 - Manual (Page 153)

C200 9-19
Administrator Management settings 9
9.6.4 Fax Settings - Self-Telephone # Information (G3/Relay)
Specify the telephone number, private branch exchange and line type for each port.
!
Detail
If two lines are connected, specify the telephone number information for each.
This parameter does not appear if the optional fax kit has not been installed.
Self-Telephone #
Register the machine's telephone number. The telephone number is used when notifying the recipient of the
machine's telephone number.
Using the keypad, type in the telephone number.
- A number up to 20 digits long can be entered for the telephone number.
!
Detail
The machine's telephone number may appear in the recipient’s reports. It is recommended that the area
code also be registered so that the number can easily be recognized by the recipient.
PBX Connect. Mode
The fax may not transmitted or received correctly if a PBX (private branch exchange) is used. Specify the
correct setting when a general subscriber line is used with a PBX. (Default: Outside)
- Extension: Select this setting if a general subscriber line is connected with a PBX (private branch
exchange).
- Outside: Select this setting if a general subscriber line is directly connected.