Konica Minolta bizhub C200 - Manual (Page 162)

C200 10-4
Fax/Scan function troubleshooting 10
10.2.2 Internet fax/IP address fax
Symptom Checkpoint Action
Cannot receive
data Is paper supplied in
place? When the paper supply icon is lit, it indicates that the paper tray is
empty and received documents are stored in the memory.
Replenish paper.
For details on the paper supply procedure, refer to the User’s Guide
[Copy Operations].
Is paper misfeed? When paper misfeeding is occurring, received documents are stored
in the memory. Remove the paper that has been stuck.
For the action for removing stuck paper, refer to the User’s Guide
[Copy Operations].
Is toner used up? If the toner has been used up, document reception is not possible.
Promptly replace the toner cartridge.
For the procedure for replacing the toner cartridge, refer to the User’s
Guide [Copy Operations].
Is the network cable
connected correctly? Check the network cable connection, and reconnect if it is disconnect-
ed.
Is the available space in
the memory sufficient? Check the remaining available space in the memory.
If it is running out, reception may fail. Or, if received, the massage may
not be printed.
Does not print
out received
data Is the Memory RX func-
tion specified? If the Memory RX function has been specified, perform the following
steps to print out the received document.
1. Touch [Job List].
2. Touch [Doc.].
3. Touch [RX Document].
4. Select the received documents type.
5. Print or forward the document.