Konica Minolta bizhub C200 - Manual (Page 141)

C200 9-7
Administrator Management settings 9
9.3 System Settings (G3/I-FAX/IP/Relay/E-Mail/FTP/SMB)
9.3.1 Displaying the Administrator Management screen
To display the Administrator Management screen, press the [Utility/Counter] key in the control panel, and
then touch [Admin.] in the screen that appeared. Type in the administrator password, and then touch [OK].
9.3.2 System Settings - Language(I/O)
The input and output languages can be specified.
9.3.3 System Settings - Output Settings - Print/Fax Output Setting - Fax/E-Mail
The print timing after printer or fax/e-mail data is received can be specified.
- Batch Print: Select this setting to print the documents after all are received.
- Page Print: Select this setting to print each page of the document after it is received.
2
Note
[Print] appears if the optional expanded memory unit (512 MB) has been installed.
If the optional fax kit has not been installed, [E-Mail] appears instead of [Fax/E-Mail].