Konica Minolta bizhub C200 - Manual (Page 156)

C200 9-22
Administrator Management settings 9
9.8 RX Settings
9.8.1 Memory RX Timer Setting (G3)
The machine is set to not print received fax documents, and print them all together at a specific time on a
specified day. By specifying a time period when faxes are not printed or by restricting printing with a
password, faxes, for example, those received at night, can be received at a safer time.
- Printing can be prevented only for received fax documents.
- Printing cannot be prevented for copies or computer prints.
- Preventing printing can be set for each day.
- If a time period is specified, all documents saved while printing was prevented are automatically printed
once printing restarts.
- To manually print documents at a time other than specified, start printing by touching [Memory Rx
ON/OFF] on the User Management screen.
- If the machine is set to prevent printing, the message "TX (NG)" may appear on the sender’s machine.
Memory RX Time
Specify the day and time when printing is stopped and when it is started.
- Enter the time in the 24-hour format.
- If a time is set, also specify the day.
- A different time cannot be specified for each day.
- The starting time cannot be the same as the stopping time.