3 registration of basic information, 1 to begin operation, 1 required environment and equipment – Konica Minolta bizhub C200 User Manual
Page 39: 2 network connection and settings, Network connection, Registration of basic information, To begin operation -2, Required environment and equipment -2, 3registration of basic information
C200
3-2
Registration of basic information
3
3
Registration of basic information
3.1
To begin operation
When starting operation of the product for the first time, register the following.
3.1.1
Required environment and equipment
The following table shows environment and equipment required to enable respective functions.
3.1.2
Network connection and settings
To use the function to transmit image data via a network connection such as network scan and network fax
functions, connecting this machine to the network and settings for network use are required.
Network connection
Connect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on the
machine.
Description
Environment and equipment
Network scan function
•
Network connection
•
Network settings
G3 fax function
•
Installation of the fax kit (optional)
•
Connecting a modular cable
Network fax func-
tion
Internet fax
•
Network connection
•
Network settings
IP address fax
•
Installation of the fax kit (optional)
•
Network connection
•
Network settings
IP relay
•
Installation of the fax kit (optional)
•
Modular cable connection
•
Network connection
•
Network settings
•
Relay transmission settings
Connector for the LAN cable