Konica Minolta bizhub C200 - Manual (Page 73)

C200 4-31
Transmitting data 4
4.5.8 Set 2 - Stamp (G3/IP/I-FAX/Relay/E-Mail/FTP/SMB)
When sending a fax using the ADF, each scanned original page can be stamped to indicate the scanned
pages.
- Select the position of the stamp.
!
Detail
If the "Quick Scan TX" function is specified, it will be canceled when the "Stamp" function is specified.
In order to use the "Stamp" function, the optional stamp unit must be installed.
The stamp ink is a consumable product. If the stamp density becomes faint, contact your service
representative.
To check whether or not the original was sent correctly, check the result report or job list.
4.5.9 Fax - Quick Scan TX (G3)
This function begins sending the fax at the same time that the first page is scanned. Use this function for
faxing originals containing a large number of pages without filling the memory. If the line is busy, transmission
begins as soon as the line is available.
- Load the original into the ADF.
- This function cannot be specified if multiple recipients are selected.
- The "2in1", "2-Sided TX", "Timer TX" and "Priority TX" functions cannot also be specified.
2
Note
This function does not appear if the optional fax kit has not been installed.