Konica Minolta bizhub C200 - Manual (Page 83)

C200 5-2
Receiving data (G3/IP/I-FAX) 5
5 Receiving data (G3/IP/I-FAX)
5.1 Receiving (G3)
5.1.1 Auto RX (fax priority)
Specify this function when using the telephone line as a dedicated line for fax transmission. When the
specified number of rings is detected, fax reception begins automatically. During reception,
appears at
the bottom of the screen to indicate that a fax is being received.
Even if the call is received from a telephone, you can talk with the caller if you pick up the hand set (or
telephone receiver) while the machine is ringing.
If the line is used only for faxing, the following settings are assumed.
- External telephone: Not connected
- Line Parameter Setting - Receive Mode: "Auto RX" is selected.
!
Detail
As a factory default, the number of rings is set to "1". The number of rings can be specified from the
Fax Settings screen in Administrator mode. For details, refer to
"Fax Settings - RX Functions (G3)" on
page 9-17 .
When the number of rings is set between 1 and 20, the specified number of rings will be produced
before the fax is received. However, if the number of rings is set to 10 or more, the recipient’s fax
machine may stop the fax before it can be received.
If the number of rings is set to "0", the fax will be received with no rings produced.
2
Note
In order to enable automatic reception, "Receive Mode" in the Line Parameter Setting screen of
Administrator mode must be set to "Auto RX". For details, refer to
"Fax Settings - RX Functions (G3)"
on page 9-17 .
Auto reception (“Fax Priority” setting)
Rings are produced.
The fax machine answers the call.
If the call is from a fax
machine
The fax is automatically
received.
If the call is from a
telephone
The caller hears a beep
and only faxes can be
received. Be sure to
inform the caller that
this fax number is only
for faxes.