Konica Minolta bizhub C550 User Manual

Page 103

Advertising
background image

To send a fax

2

C550

2-47

2.11

Sending a fax while confirming the status of the recip-
ient’s machine (Manual transmission).

Use this operation when sending a fax while checking the status of the re-
ceiving machine. This is called a manual transmission.

Quick Memory TX cannot be used with manual transmission.

1

Press [Fax/Scan] key to display the Fax/Scan screen.

2

Load the original to be faxed.

Refer to “Loading the original” on page 2-7 for details on loading
the original.

3

Specify Scan Settings functions if required.

For details on scan settings, refer to “Specifying scanning condi-
tions” on page 2-12 or
“Scan Settings” on page 6-2.

4

Touch [Off-Hook].

When [RX] is selected, touch [Send] to set the machine to Tranmis-
sion mode.

If “Confirm Address (TX)” in Utility mode is set to “ON”, [Off-Hook]
does not appear.

When an external phone is connected, lifting the receiver of the ex-
ternal phone places the machine in the same state as that when
[Off-Hook] is touched.

5

Destinations are specified as follows.

Specifying from registered destinations

Specifying by direct input

Specifying from the job history

Specifying from the program destinations

6

Touch [Start] when you hear a repeated “paw...paw” sound.

When [Start] key is pressed, the “Off-Hook start” confirmation
screen is displayed. Touch [Yes] and then touch [OK] to start trans-
mission.

The transmission begins.
If using an external telephone, replace the external telephone’s receiv-
er.

Advertising