Konica Minolta bizhub C550 - Manual (Page 484)

Appendix 12
C550 12-8
Resolution This is a degree of details when scanning an original. The higher the resolu-
tion, the more detailed the image is, and the more time (transmission time)
transmitting takes. Select the appropriate resolution.
Memory RX This is the function to store the received original in memory and to print if re-
quired.
Quick memory
transmission This is the method to start sending of fax by scanning one page of the original
at the same time. Even in case of multiple originals, this is a function to send
the original without overflowing the memory.
Group Grouping of the abbreviation No. of multiple groups. It is convenient when
there are large numbers of reception of sequential broadcast and sequential
polling in the same address.
Bulletin board This function posts the original to be viewed, or stores the original to be
transmitted through polling.
Total # of Pages Used for quick memory transmission to send the fax with the total number of
pages. This allows the recipient to check whether the all pages were received
or not (In case of memory transmission, the total no. of pages are automati-
cally added).
Consolidated
original This is a function to detect and send the respective size of original by setting
the original with different sizes.
Resending This is a function to resend the specific original stored in the memory that
couldn’t be sent either to same destination or to another destination.
Background Re-
moval This is a function to send the original by adjusting the brightness of the back-
ground color of the original.
Sharpness This is a function to send an original by enhancing the edge of character.
Main scanning
direction This is the horizontal direction for scanning originals.
Default value The setting value specified in advance when the machine was shipped from
the factory. Some default settings can be changed from the Utility mode. It
is convenient when frequently used value is set as default settings depending
on the usage conditions.
Confidential
communication A function for sending and receiving originals to be viewed only by specific
persons. The sent confidential original is saved in a confidential box on the
recipient’s fax machine and is not printed when it is received. The received
original can be printed if a specific operation is performed, for example, the
access code for the confidential box is entered.
Manual trans-
mission An operation to send a fax while checking the status of the receiving ma-
chine.
Transmission
reservation This is a function to reserve the next transmission while current transmission
or printing.
Dialing method There are three types: PB (push-button (tone) dialing), 10PPS (pulse dialing
at 10 pps), and 20PPS (pulse dialing at 20 pps).
Temporary
memory recep-
tion This is a function for automatically saving the received original in the memory
when the machine cannot print the received original, such as when the ma-
chine has run out of paper. When more paper is added, the temporarily saved
original is printed.
Terms Explanation