Konica Minolta bizhub C550 - Manual (Page 210)

Useful transmission functions 6
C550 6-51
6.15 Sending a fax after cancelling Super G3 mode (V. 34
OFF)
V. 34 OFF
V. 34 is communication method used during Super G3 fax communication.
When the recipient’s machine or this machine is connected through a private
switchboard, communication with Super G3 mode may not be possible de-
pending on the setup of the telephone line.
In such cases, fax can be sent after setting the Super G3 mode to Off by se-
lecting [V. 34 OFF].
Automatically returns to V. 34 mode when the transmission ends.
2
Note
Following functions cannot be used simultaneously.
Polling RX, Polling TX, Bulletin board registration, and Bulletin board Poll-
ing RX.
Sending the fax after setting V. 34 OFF
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to “Loading the original” on
page 2-7.
3
Touch [Communication Settings].
4
Touch [Line Settings].