Konica Minolta bizhub C550 User Manual
Page 80
To send a fax
2
C550
2-24
–
If “Confirm Address (TX)” in Utility mode is set to “ON”, the address
input screen appears again after [OK] in the address input screen is
touched. Enter the fax number of the recipient, and then press the
[Start] key or touch [Send] to begin the transmission.
–
Special dialing symbols such as tone, pause, -, etc. are entered if
necessary.
[Tone]: If pulse dialing is being used, touch this button to send a
push-button tone. Tone is used when a fax data services, etc are
used. “T” appears on the screen.
[Pause]: Touch this button to insert a pause when dialing. Touch
[Pause] once to insert a 1-second pause; multiple pauses can be
entered. “P” appears on the screen.
[-]: Entered as a delimiter when dialing. This has no effect on dailing.
“-” appears on the screen.
–
A fax number can also be entered by using the keypad in the screen
that appears after touching [Direct Input], then [Fax].
–
When the keypad is used, the fax number can be entered directly
even when [Address Book] tab or the [Job History] tab is displayed.
–
When using a dial (pulse) line, it is possible to change to push tone
by just touching [*].
The destination is specified.