Konica Minolta bizhub C550 User Manual
Page 304
Registering/Specifying Settings
9
C550
9-44
5
Touch [New].
–
For details on Relay RX settings, refer to “Specifying the ON/OFF
settings of the function (Function ON/OFF Setting)” on page 10-64.
–
For details on operation for sending a fax by specifying relay desti-
nation, refer to “Sending the fax after specifying the relay destina-
tion (F-Code TX)” on page 6-71.
–
For details on registration of Group destination, refer to “Register-
ing Group destinations” on page 9-15.
6
Set [User Box No.], [User Box Name], [Relay Destination] and [Relay TX
Password].
–
Name of up to 20 characters can be registered.
–
Specify a Group destination that is set in advance for relay destina-
tion.
–
Enter a relay password with 0-9, * and #.
–
To change the user box number, touch [User Box No.], and then
use the keypad to type in a number. If a destination is already reg-
istered with the entered number, an error message appears and the
destination cannot be registered with the entered number.
–
Touch [Cancel] to discontinue the registration.