Konica Minolta bizhub C550 - Manual (Page 321)

Utility mode 10
C550 10-15
Administrator Settings > Fax Settings > PBX Connection Setting
The connection procedure of PBX telephone line is set. (page 10-89)
Administrator Setting > Fax Setting > Report Settings
The printing method for report is set (page 10-91)
Item Description Values that can be set
PBX Connection Setting This machine is valid when con-
nected to PBX telephone line.
When these settings are valid,
external line number is set within
the range 0-9999. The Outside
line number is a number to con-
nect to Outside line as 0 of 0
transmission.
When fax number registered in
Program destination and Ad-
dress Book is set in ISD, ISD
number set here is dialed before
the registered telephone
number. (Outside line number setting) /
No*
Item Description Values that can be set
Activity Report Select whether or not to print the
report, and when to print it.
If “Daily” is selected, the report is
printed every day at a fixed time.
If “100/daily” is selected, a re-
port is printed that contains in-
formation about the latest 100
communications that were com-
pleted since the last report was
printed. In addition, the report is
printed every day at a fixed time. ON*/OFF
Following settings are made
when set to [ON].
Output Settings: Daily/ Every
100 Comm.*/100/Daily
If “Daily” or “100/daily” is select-
ed, settings can be specified for
the following.
Output Time Settings: 00:00 to
23:59 (9:00*)
TX Result Report Whether or not to print the report
is set and when the report is to
be printed is set. ON/If TX Fails*/OFF
Sequential TX result Re-
port ON*/OFF
Timer Reservation TX
Report ON*/OFF
Confidential RX Report ON*/OFF
Bulletin TX Report ON*/OFF
Relay TX Result Report ON*/OFF
Relay Request Report ON*/OFF
PC-FAX TX Error Report ON/OFF*
Broadcast Result Report The printing methods for broad-
cast result report are set. All Destinations*/Each Destina-
tion