4 when unable to receive fax, When unable to receive fax -5 – Konica Minolta bizhub C550 User Manual

Page 136

Advertising
background image

Reception

3

C550

3-5

3.4

When unable to receive fax

An error message is displayed if a fax cannot be received. Refer to “Fax can-
not be sent” on page 4-2,
and then perform the indicated operation. The er-
ror message display disappears after pressing [Stop] key.

!

Detail

If the external telephone bell keeps on ringing, [Receive Mode] may be
set to [Manual RX] in the [Line Parameter Settings] of the Utility mode.
To receive the fax automatically, the device should be set to [Auto RX].
Refer to “Specifying transmission/ receiving mode (Line Parameter Set-
tings)” on page 10-57 for deta
ils.

Reception may not be possible when the memory is full. Check that pa-
per is loaded in the paper tray.

Advertising