17 broadcast report, 17 broadcast report -37 – Konica Minolta bizhub C550 User Manual
Page 459
Reports and Lists
11
C550
11-37
11.17 Broadcast Report
Broadcast Report is printed automatically when sequential broadcast trans-
mission is completed.
ON/OFF can be set in [Sequential TX Report] of the Utility mode. Report out-
put timing (all destination batches/each destination) can be specified in
[Broadcast Result Report].
Destination: Any of the following is described.
-
Destination name for recipients’ whose destination name is registered in
Address Book.
-
Recipient’s telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints:
Describes the number of sheets sent. The sent pages and the total number
of pages are described in fractional format.
Result:
OK:
Described when communication is terminated normally.
S-OK:
Described when communication has stopped.
PW-OFF:
Described when operation power switch was turned OFF during
communication.
TEL:
Described when there is telephone call.
NG:
Described when there is communication error.
Cont:
Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).