6 sequential polling rx report, Sequential polling rx report -16 – Konica Minolta bizhub C550 User Manual

Page 438

Advertising
background image

Reports and Lists

11

C550

11-16

11.6

Sequential Polling RX Report

Result of polling to multiple destinations is printed automatically.

ON/OFF can be set in [Sequential TX Report] of the Utility mode.

Destination: Any of the following is described.
-

Destination name for recipients’ whose destination name is registered in
Address Book

-

Recipient’s telephone number

Start Time: Describes the start time of the communication.

Time: Describes the time required for communication.

Prints: Describes the number of sheets sent.

Result:

OK:

Described when communication is terminated normally.

S-OK:

Described when communication has stopped.

PW-OFF:

Described when operation power switch was turned OFF during
communication.

TEL:

Described when there is telephone call.

NG:

Described when there is communication error.

Cont:

Described when there is a transmission error and that there is tran-
sition to resend wait mode (Error page redial).

No Ans:

Described when there is no response from the recipient.

Busy:

Described when communication is not possible as the recipient’s
line is busy.

M-Full:

Described when it is not possible to receive a fax when the fax file
memory becomes full during reception.

Advertising