Konica Minolta bizhub C550 - Manual (Page 230)

Useful transmission functions 6
C550 6-71
6.22 Sending the fax after specifying the relay destination
(F-Code TX)
Relay destination specification
The relay request is a function to send the original once to the relay distribu-
tion station and from there to the transmission destination. When there are
frequent broadcasts to distant recipient destinations, the entire communica-
tion cost can be cut down by grouping the relay distribution station and the
relay distribution destination according to area.
2
Note
The fax machine that makes a relay request is called the “Originating sta-
tion”, the fax machine which actually carries out the relay broadcast is
called the “Intermediate relay station” and lastly the fax machine that is
received is called “Terminating station”.
For making a relay request, the relay box number, relay password, desti-
nation group number should be specified in the fax machine of the inter-
mediate relay station.
This function can be used only when the recipient’s fax machine that is
relay distribution station has F-code functions. For details on F-code, re-
fer to “Fax glossary” on page 12-7.
Following functions cannot be used simultaneously.
Polling TX, Polling RX, Bulletin board registration, Bulletin board Polling
RX and Password TX
Originating
station
Toll Call
Terminating station
Intermediate relay
station
Local Call
Terminating station