Konica Minolta bizhub C550 - Manual (Page 322)

Utility mode 10
C550 10-16
Administrator Settings > Fax Settings > Job Settings List
List of Fax setup values specified in this machine can be printed.
(page 11-48)
Administrator Settings > Fax Settings > Multi Line Settings > Line Pa-
rameter Setting
Parameters for extended telephone line are set. (page 10-94)
Administrator Settings > Fax Settings > Multi Line Settings > Function
Settings
Functions for extended telephone line are set. (page 10-97)
Administrator Settings > Fax Setting > Multi Line Settings > Multi Line
Settings
The communication function of telephone line 2 (extended telephone line) is
set. (page 10-100)
TX Result Report Check Whether or not to display the
transmission report selection
screen is set. When set to [ON],
it is displayed every time there is
a transmission. ON/OFF*
Item Description Values that can be set
Item Description Values that can be set
Dialing Method Sets dial methods of line 2 (ex-
tended telephone lines) European models: PB
North American models: PB*/
10pps
Number of RX Call Rings Incoming calls frequency of line
2 (extended telephone lines) is
set. The frequency of pseudo
ring-back tones from reception
of incoming call till actual recep-
tion is set. 0 to 15 times (2 times*)
Line Monitor Sound When telephone ring is heard
from speaker while communicat-
ing with line 2 (extended tele-
phone line), it is set to [ON]. ON/OFF*
Item Description Values that can be set
PC-FAX TX Settings The telephone lines when PC-
FAX is sent, are set. Line 1/Line 2/ No Selection*