Konica Minolta bizhub C550 - Manual (Page 97)

To send a fax 2
C550 2-41
2.9 When unable to send fax
If the fax cannot be sent because the recipient’s line is busy, it can be trans-
mitted again by using the redial function.
The redial function of this machine has auto redial, manual redial and resend
functions.
2
Note
The destination cannot be changed for either auto redial or manual redial
in the Current Jobs list.
Even after redialing, if the fax cannot be sent because of problems with
the line, refer to “Fax cannot be sent” on page 4-2.
Redial
Dialing the same destination again is called “redialing”.
When a fax cannot be sent because the recipient’s fax machine line is busy,
the number is redialed after a set period has elapsed. Until it is redialed, the
job to be sent is treated as a reserved job standing by to be redialed.
Auto redial function
When you are unable to send a fax because the recipient’s line is busy, the
machine automatically redials the number of times set via the Line Parameter
Setting.
!
Detail
The number of auto redials set in advance is 3 times, at three-minute in-
tervals in European models, 1 time, at three-minute intervals in North
American models. Refer to “Specifying transmission/ receiving mode
(Line Parameter Settings)” on page 10-57 regarding auto redial frequen-
cy settings.