Konica Minolta bizhub 420 - Manual (Page 238)

Setting Up the PPD Driver (Windows) 7
IC-204 7-2
Advanced
Item Function
Paper Size Specifies the paper size.
Copy Count Specifies the number of copies to print.
Scaling Specifies the enlargement and reduction ratio.
TrueType Font Replace the TrueType font with the printer font.
Advanced Printing Fea-
tures A setting is made to decide whether detailed printing functions are
provided or not.
PostScript Output Op-
tion Set the output type of the PostScript file.
TrueType Font Down-
load Option When printing the TrueType font, select the type of a font that is
downloaded to the printer.
PostScript Language
Level Set the level of PostScript.
Send PostScript Error
Handler When there occurs a PostScript error, a setting is made to decide
whether a report is printed or not.
Mirrored Output The print is made with a reversal made between right and left.
Negative Output The print is made with a reversal made between black and white.
Offset Specifies offset.
Output Tray Selects the output tray.
Binding Position Selects the binding position.
Duplex Performs duplex printing.
Combination Selects booklet printing.
Staple Performs stapling.
Punch Performs hole punching.
Fold Staple Executes the Fold & Staple.
Front Cover Page Attaches a front cover page.
Paper Tray (Front Cover
Page) Selects the input tray for the front cover.
Back Cover Page Attaches a back cover page.
Paper Tray (Back Cover
page) Selects the input tray for the back cover.
Transparency Interleave Inserts interleaves between overhead projector transparencies.
Paper Tray (Transparen-
cy Interleave) Selects the input tray for the transparency interleaves.
Wait Mode Stops printing temporarily after part of the document has been print-
ed so that the proof print can be checked.
Smoothing Set the smoothing process.
Print Density Set when adjusting the Print Density.