JLG 10MSP Service Manual - Manual (Page 13)

SECTION 1 - MACHINE SPECIFICATIONS
3121228 – JLG Lift – 1-1
SECTION 1. MACHINE SPECIFICATIONS
Table 1-1. 10MSP - Machine Operating Specifications
10MSP
Maximum Occupants: 1
Maximum Work Load (Capacity): See Table 1-2 on Page 1-2
Maximum Travel Grade (Gradeability): (Platform STOWED ONLY) 20% (8.5°)
Maximum Travel Grade (Side Slope): (Platform STOWED ONLY) 5°
Tilt Alarm Cut Out Limit: (Any Direction) (Platform ELEVATED) 1.5°
Machine Height (Platform Stowed) 57 in. (1.45m)
Maximum Vertical Platform Height: 10 ft. (3.05m) - Standard
7 ft. (2.13m) - with Optional Height Limiter
Maximum Wheel Load (Per Wheel): Rear 575 lb. - Front 400 lb.
Rear 86.6 PSI - Front 151.2 PSI
Maximum Drive Speeds(Operator Variable):
Platform Elevated:
0.5 - 3.4 mph - (0.8 - 5.5 kph)
0.5 mph (0.8 kph)
Max. Platform Speeds (w/Max. Load): Platform Up: 13 sec.
Platform Down: 9 - 13 sec.
Gross Machine Weight
(machine + maximum capacity):
1950 lb. (885 kg)