Heidolph Hei-VAP Precision - Manual (Page 31)

Operation Operation
60 61
4. Reel in the cable to the desired length by wrapping the cable around the reel.
5. Press the shell to the control panel.
2. The cable reel is surrounded by a shell.
3. Pull the control panel apart, so that the cable reel can be seen. The cable reel is
surrounded by a shell.
4. Place the control panel on the prefabricated guide rails that snap in and attach
on the wall or deposit it on a stable surface.
2. Reel in the cable to the desired length by wrapping the cable around the reel.
3. Press the shell to the control panel.
1. Pull the control panel apart, so that the cable reel can be seen.
The shell can be turned by 180° as desired, in order to adjust the surface and view
to the control panel.