INFICON HLD6000 Refrigerant Leak Detector Interface Description - Manual (Page 13)

ASCII Protocol 13
*STATus:ERRor:TEXT Text of the actual error / warning 294 R
*STATus:LEAK:Gas Gas type of internal reference leak 457 R
*STATus:LEAK:LREff internal reference leak temperature compensated in g/a 394 R
*STATus:LEAK:LRNom internal reference leak nominal in g/a 394 R
*STATus:LONGTERMHist long term history
internal index (0...9) of the entry
Probe ID
gas type prob
selected gas type (smart)
p1 actual value
p2 actual value
p1 nominal value
p2 nominal value
warning bits
S-value
Temperature main board
device state
minutes since start (255 max)
switch on counter (last 2 digits)
date without year
time
*STATus:LONGTERMH newest
*STATus:LONGTERMH:1 Entry 1 (newest)
*STATus:LONGTERMH:2 Entry 2
...
*STATus:LONGTERMH:10 Entry 10 (oldest)
341 R
*STATus:RESETSource Source for last device reset:
POWER_ON, LOW_POWER, WINDOW_WATCHDOG,
INDEPENDENT_WATCHDOG, SOFTWARE and/or
NRST_PIN 1815 R
*STATus:SNProbetype Sniffer probe (NOT_DETECTED, HLD5000, HLD6000) 302 R
*STATus:SNkey Status of sniffer key. 1=pressed, 0=not pressed Status word R
*STATus:SWITCHONCnt Switch on counter 157 R
*STATus:TRIGger status of trigger
S1,S2 with S1…S2 is “ON” or “OFF” depending of the
states of trigger1 and trigger2 385 R
Command Meaning
Relates
to LD
cmd. no.
Read /
Write