Dismantling probe, E 411 – INFICON Sensistor ISH2000 Hydrogen Leak Detector User Manual
Page 100
Advertising
Sensistor ISH2000 Technical Reference Manual (TRM)
EN- 100
Dismantling probe
1. Loosen the LEMO contact nut
using a spanner for noched probe
nuts.
Figure E-27: LEMO connector
2. Unscrew the 2 screws at the but-
tom as shown in the picture to the
right.
Figure E-28: 2 screws
3. Gently separate the 2 parts.
Figure E-29: Separated pars
E 411
Advertising