INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 5)

EN- 5 Sensistor ISH2000 Technical Reference Manual (TRM)
A 100
A 100 Introduction to the Sensistor ISH2000 series
Sensistor ISH2000 can be purchased in one of three versions. A desktop model
(Sensistor ISH2000), a battery operated model (Sensistor ISH2000C), and a
panel mount model (Sensistor ISH2000P).
Sensistor ISH2000
Figure A-1: Sensistor ISH2000
Sensistor ISH2000 is equipped with a number of powerful functions making it
very easy to integrate in a semi or fully automatic test system. The functions
range from output of all necessary status signals and printer/communication
port to an advanced Active Probe Control system (APC). This makes the detec-
tor capable of controlling advanced sample collecting devices down to simple
test fixtures.
Sensistor ISH2000C
Figure A-2: Sensistor ISH2000C
The battery operated model, Sensistor ISH2000C, has all the Sensistor ISH2000
features apart from the APC system. This means that only passive probes (for
example Hand Probe P50) can be used. The battery, a Li-ion battery at 14.8 V,
can not support the current required to operate external probes. Sensistor
ISH2000C will operate for 14 hours on a fully charged battery with screensaver
and mute function. One hour charging will give about one hour of operating
time.
Sensistor ISH2000P
Figure A-3: Sensistor ISH2000P
The panel mount model, Sensistor ISH2000P, has identical features of the Sen-
sistor ISH2000.The difference is that the Sensistor ISH2000 can be installed in