INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 65)

EN- 65 Sensistor ISH2000 Technical Reference Manual (TRM)
C 500
C 500 Factory configuration of the leak
detector parameters
Default parameters
Range and default settings of all Sensistor ISH2000 parameters.
Configuration
Parameter Range Factory default Customer modification
Analysis Unit Several Choices PPM
APC Time A 0.0 - 6000.0 s 10.0
APC Time B 0.0 - 6000.0 s 0
APC Time C 0.0 - 6000.0 s 0
APC Time D 0.0 - 6000.0 s 0
Audio Base Frequency Several Choices 400 Hz
Auto Range ON/OFF ON
Audio Ready Pulse ON/OFF ON
Audio Threshold
(Detection) 0 - 100 % 0 %
Audio Threshold
(Analysis) 0 - 100 % 4 %
Brightness 0 - 21 21
Calibration Time Min Calibra. Time-30 s 10 s
Clock hh:mm:ss -
Contrast 0-20 10
Correlation Values 1.00E-37 - 1.00E+37 1.00E+00 = 1
Date YY-MM-DD -
Debug Mode ON/OFF OFF
Detector Signal Level 0-100 % 20 %
Direct sensitivity
adjustment ON/OFF ON
Display Threshold 0-100 % 4 %
Invert Colors ON/OFF OFF
Language Several choices English
Measure/Print Button ON/OFF OFF
Min Calibration Time 0 - 30 s 5 s
Min Presentation Time 120 s 1 s
Multipoint Analysis Several Choices OFF
Multipoint Analysis Time 0.0 - 30.0 s 5.0 s