I/o interface, B 300 – INFICON Sensistor ISH2000 Hydrogen Leak Detector User Manual
Page 33
Advertising
EN- 33
Sensistor ISH2000 Technical Reference Manual (TRM)
B 300
B 300 Controlling the detector with the I/O
interface
I/O Interface
The Sensistor ISH2000 is equipped with a parallel Probe Control port. This
Probe control port can be used for controlling active probes, feeding status sig-
nals to a supervising computer system, and for simple test fixture control.
Note: Battery operated model Sensistor ISH2000C does not have a Probe Con-
trol Port.
Pin configuration for the different detector models is described under Model
Specific Specifications below.
See "Sensistor ISH2000 Technical Specifications" on page page 23 for electri-
cal specifications.
Advertising