INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 47)

EN- 47 Sensistor ISH2000 Technical Reference Manual (TRM)
C 200
Push-buttons
The functions of the push-buttons are shown at the lower edge of the display.
In this manual the buttons are numbered, from left to right, 1, 2, 3, and 4. The
push-buttons are used to:
• Change from one menu item to another using the < and > buttons.
• Press Enter to move down to the nearest submenu.
• Press Save to save the set value.
• Press Undo to restore the previously set value.
Press Esc to move up to the nearest higher level(s).
Demo Mode
Demo Mode is a demonstration mode, special designed for seller. All APC driv-
ers for standard probes and filler will be selectable. The seller can easily swap
between the different drivers and won't need to download them.
To set the Detector in Demo Mode:
• Select: Menu/General Settings/Change Password
• Enter "DEMO"
• Confirm New Password "DEMO"
Select driver under menu: APC Settings/Probe Type
The word "DEMO" will be shown at start up.
To turn Demo Mode off repeat the list above.