INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 98)

Sensistor ISH2000 Technical Reference Manual (TRM) EN- 98
E 410
Removal of panel buttons
Unscrew the panel button card
Philip Head Screws as shown in the
pictures to the right.
Figure E-23: Unscrew the panel button card Philip Head Screws
Figure E-24: Panel button card
Note: When mounted, the high
buttons shall be mounted in the
two middle holes!
When mounting the Main PCB the
lower nut on LEMO connector with
washer must be located 6 mm
above the PCB surface.