INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 48)

Sensistor ISH2000 Technical Reference Manual (TRM) EN- 48
C 201
C 201 Menu system
The menu system is designed as a tree structure similar to that used in mobile
telephones. The display shows all the levels when browsing down through the
menus so that you can always see exactly where you are.
Figure C-2: Push-buttons
To enter the menus, press Menu (button 4). Press < and > (button 2 and button
3) to choose between main menus.
If no setting is made in a menu or its submenus within 60 seconds, the instru-
ment will revert to the Detection Mode/Analysis Mode.
The buttons may change functions in different menues. Always read the text,
just above the buttons in the display, for the button functions.
All changes in values are valid only when saved using the Save button (button
4).
Use the Undo button (button 1) to delete a change in value and revert to the
previous setting.
Use the Esc button (button 1) to browse backwards through the menus to the
start position Detection Mode/Analysis Mode/Combined Mode.
To change quickly from Detection Mode to Analysis Mode or vice versa, press
button 3 three times in succession.
4 1 2 3