INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 54)

Sensistor ISH2000 Technical Reference Manual (TRM) EN- 54
C 210
C 210 Password
Change Password
The user password is a text string (max 12 alphanumerical characters) used to
lock critical parameters. Setting password to an empty string (no characters)
means that no password is needed to modify the critical parameters. The
default is no password (“”).
Contact INFICON AB if you have lost your user password. If the Password Pro-
tected Calibration parameter is set to ON you will be prompted for a password
when starting a calibration.
Note: Setting Password Protected Calibration to ON has no effect if no pass-
word is set.
Note: APC controlled calibration can be started from the bus in both cases.