Dismantling sensistor ish2000, E 410 – INFICON Sensistor ISH2000 Hydrogen Leak Detector User Manual
Page 89
Advertising
EN- 89
Sensistor ISH2000 Technical Reference Manual (TRM)
E 410
Dismantling Sensistor ISH2000
1. Turn off the instrument and
remove power supply.
2. Unscrew the two torx screws
(T20) on the back side of the unit.
Figure E-7: Unscrew the two torx screws
3. Open the instrument by pulling
out the front as shown in the pic-
ture to the right.
Figure E-8: Pull out the front
Advertising