INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 19)

1 - 7
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
Oscillator kits include:
Oscillator. . . . . . . . . . . . . . . . . . . PN 783-500-013
15.2 cm (6 in.) BNC cable . . . . . PN 782-902-011
One of the following:
3 m (10 ft.) BNC Cable . . . . . PN 782-902-012-10
7.6 m (25 ft.) BNC Cable . . . PN 782-902-012-25
15.2 m (50 ft.) BNC Cable . . PN 782-902-012-50
22.9 m (75 ft.) BNC Cable . . PN 782-902-012-75
These kits are designed for use with the standard in-vacuum cables ranging in
length from 15.2 cm (6 in.) to 78.1 cm (30.75 in.).
1.6.2.2 Sensors
Front Load Single Sensor. . . . . . . . . . . . PN SL-XXXXX
Cool Drawer Single Sensor . . . . . . . . . . PN CDS-XXFXX
Sputtering Sensor. . . . . . . . . . . . . . . . . . PN 750-618-G1
UHV Bakeable Sensor . . . . . . . . . . . . . . PN BK-A0F
Low Profile Singe Sensor . . . . . . . . . . . . PN 783-500-042
Low Profile Bakeable Single Sensor . . . PN 783-500-009
NOTE: Low Profile Single Sensors also have options with no cooling lines.
NOTE: "X" in part number indicates customer-selectable option,
see www.inficon.com for Sensor Datasheets.
NOTE: Multi-crystal (rotary) sensors and dual sensors should
not be used with STM-2.