INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 52)

4 - 4
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
4.3 STM-x_win32.VI Window
The STM-x_win32.VI window displays Rate, Film Thick(ness), and Substrate
Thick(ness) for the connected sensor. This window also provides an indicator for a
crystal fail (Xtal OK?), Running time, Life percentage, Run number, Logging status,
and Film name as well as customizable display parameters, graphical information,
and access to Setup, Operate, Films, Rate Graph, Mass/Thick Graph, Frequency
Graph, and Help/About tabs (see
Figure 4-2 ).
NOTE: Right-click and select Description and Tip for additional information.
Figure 4-2 STM-x_win32.VI live display
 Setup tab (see section 4.3.1 on page 4-6 )
 Operate tab (see section 4.3.2 on page 4-10 )
 Films tab (see section 4.3.3 on page 4-12 )
 Rate Graph tab (see section 4.3.4 on page 4-14 )
 Mass/Thick Graph tab (see section 4.3.5 on page 4-15 )
 Frequency Graph tab (see section 4.3.6 on page 4-16 )
 Help/About tab (see section 4.3.7 on page 4-18 )