3 films, Ab (see, Section 4.3.3 – INFICON STM-2 USB Thin Film Rate/Thickness Monitor User Manual
Page 60
Advertising
4 - 12
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
4.3.3 Films
Displays a list of films set up for the process in the Films Database. The film
outlined in blue is the active film.
Figure 4-10 Films tab
Edit films . . . . . . . . . . . . . . . . . . . . . Displays FilmEditor.vi window to add or
remove films to the Films Database (see
). Each of the following
parameters can be manually edited or input
using the Materials button:
Name
Density
Z-Ratio
Tooling
# samples
Notes
NOTE: User defined films can be input by
typing over existing values or by
entering data into empty cells.
Advertising