INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 40)

3 - 14
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
3.3.2.1.4 Frequency Tab
Figure 3-10 Frequency tab
Y Axis Range pane
Min. . . . . . . . . . . . . . . . . . . . . . . . . . 4.000000 to 6.100000 MHz
Minimum y-axis value displayed on the
Frequency graph.
NOTE: Minimum value must be less than the
value entered for the maximum.
Max. . . . . . . . . . . . . . . . . . . . . . . . . . 4.000000 to 6.100000 MHz
Maximum y-axis value displayed on the
Frequency graph.
NOTE: Maximum value must be greater
than the value entered for the
minimum.
Axis Ticks pane
X Step . . . . . . . . . . . . . . . . . . . . . . . 0 to 100
Displays unlabeled x-axis ticks at the interval
selected.
NOTE: Ticks are only visible if Visible has
been selected. Clear to disable ticks.
Y Step . . . . . . . . . . . . . . . . . . . . . . . 0.000000 to 100.000000
Displays unlabeled y-axis ticks at the interval
selected.
NOTE: Ticks are only visible if Visible has
been selected. Clear to disable ticks.